The reason why the aseptic homogenizer is widely used is that there are many features of the aseptic homogenizer. There are two characteristics that make our users particularly profound. The specific explanations are as follows:
1. The operation of the aseptic homogenizer is very simple. The aseptic homogenizer is particularly simple to use. Place the sample in a homogenized bag, and then close the bag opening, close the door of the sterile homogenizer, and finally control the panel. The area is programmed, set to the beat frequency we need, and the slap effect. The homogenizer bag of the aseptic homogenizer is a disposable sterile homogenous bag. After the instrument is used, the instrument is not cleaned and the use is very simple.
2. The tissue cells in the sample extracted from the sterile homogenizer are particularly fine. The aseptic homogenizer has particularly superior performance in extracting sample tissue cells. The extraction effect is obvious, and the extracted tissue cells are very suitable for experimental requirements.
How to use homogenizer bags for homogenizers?
The homogenizer bag of the aseptic homogenizer is the most important part of the aseptic homogenizer instrument. He has a great role. Before using the homogeneous bag of the homogenizer, we have to confirm that the homogenizer bag does not have any Bacterial contamination. If bacterial contamination is found, it should be immediately stopped or replaced with a new homogeneous bag.
The homogenizer bag of the aseptic homogenizer uses the pressure rod on the door of the homogenizer to press the hole of the homogenizer bag to achieve the best effect of homogenization. In doing so, the overflow of the test solution is prevented in time. . The slap effect of the aseptic homogenizer can be programmed, its setting effect can be accurate to a few seconds, and the frequency is the number of seconds. This is what we often refer to as the segmented programming of a sterile homogenizer.
How to operate a sterile homogenizer
1. Prepare the pretreated sample and place it in a sterile homogeneous bag;
2. Open the door of the homogenizer (which can be fully opened) and clamp the opening of the sterile homogenizer bag when closing the door;
3, choose a good program (such as the slap speed, slap time, etc.), began to beat the homogenous work; homogeneity is completed, open the homogenizer door, remove the processed sample, temporarily placed on the sample rack.
4, sterile homogenizer optional accessories;
5, optional filter homogeneous bag;
6, optional disposable sterilization tube.
7. End the completion.
So why should a sterile homogenizer be made into a flapper?
An aseptic homogenizer is a homogenization treatment of microorganism samples. The effect is obvious. It is an indispensable and unique instrument in the laboratory microbiological sample. His superior performance allows users to particularly like it. Some of the initial samples of microorganisms were dry cake solids, dried paste solids, and powdered solids. However, we often need liquid specimen samples in our experiments. This will help to set up the experiment. The experimental results are obvious. The liquid samples are beneficial to the analysis of microorganisms and vaccination industries.
The effective principle of the aseptic homogenizer tapping is not complicated. It is simple to use. First, the sample is cut to produce a small block solid, then the sample is placed inside the instrument to dissolve the soluble solvent, and finally pressed. The mouth of the homogenized bag. Placed in a sterile homogenizer, the homogenizer homogenizes the homogenizer bag with a certain amount of percussive force of uniform force, creating pressure pressure and making the sample look as we need it to be.
